Specialist Components Rover Mini MPi 45mm/50mm Throttle Body Kit
Designed as a direct-fit upgrade, this Specialist Components Rover Mini MPI 45mm or 50mm throttle body kit installs easily into a standard MPi Mini without any body modifications, offering a cost-effective performance enhancement suitable for all MPi-equipped Minis.
Compatible Engines:
- 1275 MPi, or similar MPi-equipped Mini, with a twin-plug MEMS2J ECU system and manual transmission.
How to Order:
This package is available directly from Specialist Components. For more details and to order online, please visit their website here.
Specialist Components Rover Mini MPi 45mm / 50mm Throttle Body Kit
Following the success of their carburettor replacement kits, Specialist Components has expanded the range to include a bolt-on engine management solution for Rover Minis equipped with Multi Point Injection (MPi) systems.
This new system provides full mappability for your MPi engine, allowing precise tuning and improved power delivery. By replacing the restrictive factory throttle body and inlet manifold with high-flow, performance-engineered components, the system introduces fully programmable engine management for maximum control and efficiency.
Compatible Engines:
- 1275 MPi, or similar MPi-equipped Mini, with a twin-plug MEMS2J ECU system and manual transmission
Not suitable for SPI or automatic transmission. - Designed as a direct-fit upgrade, it installs easily into a standard MPi Mini without any body modifications, offering a cost-effective performance enhancement suitable for all MPi-equipped Minis.
Package Includes:
- SC One-Piece Throttle Body (45mm or 50mm)
- SC Billet Injector Adapter
- High-Flow Fuel Injectors
- Billet Fuel Rail
- High-Flow Inlet Manifold
- High-Flow Billet Ram Pipe
- Bespoke SC-Branded ITG Air Filter and Backplate
- Bespoke MPi Wiring Harness
- SC D400 Fully Mappable ECU
- USB Interface Dongle
- Air Temperature Sensor
- Throttle Cable Locking Nuts
- Brake Servo Adapter for Inlet Manifold
- Part Load Breather Manifold
- Adjustable Fuel Pressure Regulator
*Guide only, full information can be found at Specialist Components
Performance Advantages:
Now you can tune your injection Mini just as precisely as carburetted models.
Take full advantage of any engine modifications, adjust idle speed, ensure MOT compliance (with a suitable catalytic converter), and monitor sensor performance, all without the need for costly diagnostic tools.
The system has been rolling-road tested, demonstrating clear performance gains over the factory-fitted injection hardware and ECU on a standard Rover MPi Mini.
How to Order:
This package is available directly from Specialist Components. For more details and to order online, please visit their website here.
Please Note
Installation:
- ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
- Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.
Incorrect installation of this product may result in engine damage.
This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert.
S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.
Specialist Components Rover Mini MPi 45mm / 50mm Throttle Body Kit
Following the success of their carburettor replacement kits, Specialist Components has expanded the range to include a bolt-on engine management solution for Rover Minis equipped with Multi Point Injection (MPi) systems.
This new system provides full mappability for your MPi engine, allowing precise tuning and improved power delivery. By replacing the restrictive factory throttle body and inlet manifold with high-flow, performance-engineered components, the system introduces fully programmable engine management for maximum control and efficiency.
Compatible Engines:
- 1275 MPi, or similar MPi-equipped Mini, with a twin-plug MEMS2J ECU system and manual transmission
Not suitable for SPI or automatic transmission. - Designed as a direct-fit upgrade, it installs easily into a standard MPi Mini without any body modifications, offering a cost-effective performance enhancement suitable for all MPi-equipped Minis.
Package Includes:
- SC One-Piece Throttle Body (45mm or 50mm)
- SC Billet Injector Adapter
- High-Flow Fuel Injectors
- Billet Fuel Rail
- High-Flow Inlet Manifold
- High-Flow Billet Ram Pipe
- Bespoke SC-Branded ITG Air Filter and Backplate
- Bespoke MPi Wiring Harness
- SC D400 Fully Mappable ECU
- USB Interface Dongle
- Air Temperature Sensor
- Throttle Cable Locking Nuts
- Brake Servo Adapter for Inlet Manifold
- Part Load Breather Manifold
- Adjustable Fuel Pressure Regulator
*Guide only, full information can be found at Specialist Components
Performance Advantages:
Now you can tune your injection Mini just as precisely as carburetted models.
Take full advantage of any engine modifications, adjust idle speed, ensure MOT compliance (with a suitable catalytic converter), and monitor sensor performance, all without the need for costly diagnostic tools.
The system has been rolling-road tested, demonstrating clear performance gains over the factory-fitted injection hardware and ECU on a standard Rover MPi Mini.
How to Order:
This package is available directly from Specialist Components. For more details and to order online, please visit their website here.
Please Note
Installation:
- ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
- Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.
Incorrect installation of this product may result in engine damage.
This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert.
S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.
RELATED PRODUCTS
From £67.50 (exc. VAT)
