Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered
Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered - Image 2
Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered - Image 3
Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered - Image 4
Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered - Image 5
Custom AT Power Dry Sump Oil Pump Assemblies - Bracketry and Filtered - Image 6
BESPOKE-OIL-PUMP-G

Custom AT Power Dry Sump Oil Pump Assemblies – Bracketry and Filtered

For AT Power’s unique configured oil pump Assemblies, please enquire with the following information so our team of experts can find a solution and quote for your requirements:

  • Stages 1,2,3 or 4
  • Flow rates (must fit existing: 7.9/11.9/14.3/16.5/20.1/22.0)
  • Long or short nose
  • Filtered if required (only available in 3 & 4 Stage Cordis)
  • Bracketry if required
  • Pulley tooth amount and bore size, if required
  • Anodised finish colour

If you are unsure on any of the above our team are on hand to help.

We design and manufacture in-house, in the UK.

If you wish to modify your existing AT Power Oil Pump assembly, please provide us with your specific requirements along with the serial number found on the product’s sticker. Do not take this apart yourself, as this may cause damage and will void your warranty.

SKU: BESPOKE OIL PUMP

Oil Pump Assemblies

For unique AT Power Oil Pump Assemblies, we may be able to modify AT Power’s existing housing design. Fuel rates have to fit our existing parameters.

We design and manufacture in-house, in the UK.

If you wish to modify your existing AT Power Oil Pump assembly, please provide us with your specific requirements along with the serial number found on the product’s sticker. Do not take this apart yourself, as this may cause damage and will void your warranty. If you need to change the fittings, contact us with your serial number and we will advise accordingly.

Oil Pump Assemblies:

For AT Power’s configured oil pump assemblies, please enquire with the following information so our team of experts can find a solution and quote for your requirements.

  • Stages: 1,2,3 or 4
  • Flow Rates (must fit existing: 7.9/11.9/14.3/16.5/20.1/22.0) Calculator here.
  • Long or Short Nose
  • Filtered if required (only available in 3 & 4 stage Cordis)
  • Pulley tooth amount and bore size, if required
  • Anodised finish colour

If you are unsure on any of the above our team are on hand to help.

Material Specification:

  • Areospace billetgrade Aluminium with 6082-T6 temper
  • Anodised finish

Motorsport Use Only! This product is designed for professional motorsport applications and must be installed by a qualified technician. If assistance is required, please contact AT Power’s sales team.

Please Note

Contact us if you require a custom Oil Pump Assembly fabrication.

If you wish to modify your existing AT Power Oil Pump assembly, please provide us with your specific requirements along with the serial number found on the product’s sticker. Do not take this apart yourself, as this may cause damage and will void your warranty. If you need to change the fittings, contact us with your serial number and we will advise accordingly.

Installation:

This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert. Incorrect installation of this product may result in engine damage.

S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.

Anodised Finishes:

Kindly note that the colour swatches are intended for guidance only. Variations in colour and finish may occur due to the inherent nature of the anodising process and its suitability. Additionally, printouts and on-screen displays may differ in shade.

Returns and Cancellations:

Our Oil Pump Assemblies are classified as ‘Bespoke’ products, as they are made to order. Please note that different terms apply to cancellations and refunds for bespoke items. You can find more information, clicking here.

Delivery

Our Oil Pump assemblies are bespoke and made to order:

  • Standard lead time is advised at quotation stage, with production commencing from receipt of payment. The timeframe is a guideline and is not guaranteed.

If purchased with other items:

  • Your order will be dispatched according to the longest lead time of any item included.

For further details, please refer to our Terms & Conditions.

Documents

AT Power Anodising Colour Examples
AT Power Oil Pump Pressure Relief Valve (PRV) Adjustment
AT Power Oil Pump Pulley Attachment
AT Power Typical Dry Sump System Installation Schematic
Cordis Oil Pump Flow Rate Guide
Installation Guide – AT Power Cordis Oil Pump and Timing Belt
Technical Drawing – 16.5L/Min – 2xScavenge 22.0L/Min – Short Nose [SKU: 104-103-00037]
Technical Drawing – 3 Stage Cordis – Filter Housing – [SKU 104-103-00091]
Technical Drawing – 3 Stage Mini Cordis – Short Nose – [SKU 104-103-00121]

Oil Pump Assemblies

For unique AT Power Oil Pump Assemblies, we may be able to modify AT Power’s existing housing design. Fuel rates have to fit our existing parameters.

We design and manufacture in-house, in the UK.

If you wish to modify your existing AT Power Oil Pump assembly, please provide us with your specific requirements along with the serial number found on the product’s sticker. Do not take this apart yourself, as this may cause damage and will void your warranty. If you need to change the fittings, contact us with your serial number and we will advise accordingly.

Oil Pump Assemblies:

For AT Power’s configured oil pump assemblies, please enquire with the following information so our team of experts can find a solution and quote for your requirements.

  • Stages: 1,2,3 or 4
  • Flow Rates (must fit existing: 7.9/11.9/14.3/16.5/20.1/22.0) Calculator here.
  • Long or Short Nose
  • Filtered if required (only available in 3 & 4 stage Cordis)
  • Pulley tooth amount and bore size, if required
  • Anodised finish colour

If you are unsure on any of the above our team are on hand to help.

Material Specification:

  • Areospace billetgrade Aluminium with 6082-T6 temper
  • Anodised finish

Motorsport Use Only! This product is designed for professional motorsport applications and must be installed by a qualified technician. If assistance is required, please contact AT Power’s sales team.

Please Note

Contact us if you require a custom Oil Pump Assembly fabrication.

If you wish to modify your existing AT Power Oil Pump assembly, please provide us with your specific requirements along with the serial number found on the product’s sticker. Do not take this apart yourself, as this may cause damage and will void your warranty. If you need to change the fittings, contact us with your serial number and we will advise accordingly.

Installation:

This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert. Incorrect installation of this product may result in engine damage.

S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.

Anodised Finishes:

Kindly note that the colour swatches are intended for guidance only. Variations in colour and finish may occur due to the inherent nature of the anodising process and its suitability. Additionally, printouts and on-screen displays may differ in shade.

Returns and Cancellations:

Our Oil Pump Assemblies are classified as ‘Bespoke’ products, as they are made to order. Please note that different terms apply to cancellations and refunds for bespoke items. You can find more information, clicking here.

Delivery

Our Oil Pump assemblies are bespoke and made to order:

  • Standard lead time is advised at quotation stage, with production commencing from receipt of payment. The timeframe is a guideline and is not guaranteed.

If purchased with other items:

  • Your order will be dispatched according to the longest lead time of any item included.

For further details, please refer to our Terms & Conditions.

Documents

AT Power Anodising Colour Examples
AT Power Oil Pump Pressure Relief Valve (PRV) Adjustment
AT Power Oil Pump Pulley Attachment
AT Power Typical Dry Sump System Installation Schematic
Cordis Oil Pump Flow Rate Guide
Installation Guide – AT Power Cordis Oil Pump and Timing Belt
Technical Drawing – 16.5L/Min – 2xScavenge 22.0L/Min – Short Nose [SKU: 104-103-00037]
Technical Drawing – 3 Stage Cordis – Filter Housing – [SKU 104-103-00091]
Technical Drawing – 3 Stage Mini Cordis – Short Nose – [SKU 104-103-00121]

RELATED PRODUCTS

4 Stage Cordis Gerotor Oil Pump with Pressure Relief Valve (PRV)
Oil-Pump-Fittings-JIC-10-JIC-12-JIC-16-Blanking
Mid Steel L-Section Crankshaft Pulley Blank 16 / 18 Tooth
Dry Sump Easy Clean Oil Tank 5.0L / 7.0L / 10.0L
3-Stage-Cordis-Oil-Pump
1 Stage Cordis Oil Pump

1 Stage Cordis Oil Pump

From £300.00 (exc. VAT)

Pencil Style Tension Gauge for Timing Belt Installation
2 Stage Cordis Gerotor Oil Pump - Scavenge / Pressure Relief Valve (PRV)
L Section Timing Belts - 3/8" pitch - 210L075 - 225L075 - 240L075 - 255L075 - 263L075 - 270L075 - 277L100 - 240L100

Innovative Patented Shaftless Technology

Designing performance throttles and sumps since 2005

In house design, manufacturing & testing

Made in United Kingdom