0
Contact Us
Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies
Customise Honda B16A/B18C5 45 mm EFI Shaftless ITBs – Direct‑to‑Head Throttle Bodies

Customise Ford Sigma / Zetec SE 1.6L 38mm EFI ITB – Non-Injected Direct-to-Head Throttle Bodies

£1,495.00 (exc. VAT)

Boost airflow and throttle response on your Ford Sigma/Zetec SE 1.6L with this 38mm Non-Injected EFI ITB Kit. Lightweight, direct-to-head design with shaftless throttle bodies for improved engine performance.

Compatible Engines:
Ford Sigma / Zetec SE 1.6L
Ford Fiesta, Puma, and other Sigma-powered models

Technical Drawing here.

Professional installation, ECU Compatibility and Tuning required. Failure to install this product correctly will cause damage to your engine and void warranty.

  • *Anodising Colours £120 exc. VAT - Silver & Black £0
    *Select Extension Length

    Please Contact us to order Curved Extensions

    *Select Ram Pipes
    *Select Fuel Rail End Fittings
    *Select Cable Pull Or Drive-By-Wire
    *Select Configuration (CP)
    *Select Configuration (DBW)

    Refer to Images for position

    *Select TPS Throttle Side

    For TPS side, refer Technical Drawings in Documents

    *Select TPS Throttle Side

    For TPS side, refer Technical Drawings in Documents

    *Select Throttle TPS (RHS)
    *Select Throttle TPS (LHS)
Make an Enquiry
SKU: 102-104-00033Category:

Ford Sigma / Zetec SE 1.6L 38mm EFI ITB Kit – Non-Injected Direct-to-Head Throttle Bodies

Enhance your Ford Sigma or Zetec SE 1.6L engine with our 38mm Electronic Fuel Injection (EFI) Individual Throttle Body (ITB) Kit, designed for non-injected, Direct-to-Head (DTH) configurations. Ideal for motorsport and high-performance builds, this kit delivers improved airflow, throttle response, and engine performance.

Compatible Engines:

  • Ford Sigma / Zetec SE 1.6L
  • Ford Fiesta, Puma, and other Sigma-powered models

While similar engine may share architecture, port shape and spacing can vary. Check the technical drawings match your inlet ports.

Key Features & Benefits:

  • Direct-to-Head (DTH) EFI Throttle Bodies: Designed for precise alignment to the cylinder head – no adaptor plates required
  • Shaftless Technology: Patented Shaftless butterfly valve design improves air velocity by 10% and throttle response by eliminating the central throttle shaft obstruction.
  • Precision Port Matching: CNC-machined to align perfectly with OEM intake ports for seamless airflow.
  • Twin Housing Configuration: 45mm billet aluminium twin oval housings deliver lightweight strength and exceptional durability.
  • Improved Induction Airflow: Knife-edged butterfly blades reduce turbulence and increase engine power.
  • Fully Assembled: Supplied ready to bolt on, with no additional fabrication required.
  • Throttle Position Sensors (TPS): Choose between rotary contact or Hall Effect contactless sensors for reliable tuning input.
  • Make Power personal with anodised colour finishes to suit your setup

Performance Advantages:

  • Increased horsepower and torque
  • Lightweight and durable
  • Sharper throttle response and increased engine performance
  • Perfect for naturally aspirated and tuned applications
  • Ideal for motorsport applications, track day builds, race cars or high-performance engine builds and street setups

If you require something more bespoke, please contact us.

Complete your build: Sold Separately

  • AirFlow Synchrometer here
  • Megaflow Air Filter JC50/S/65 here.
  • 3m Motorsport Cable here.
  • Throttle Twin Housing – 1/8″ BSP to 5/16″ (8mm) Hosetail Fitting – 1 required per cylinder here.

Important:

  • ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
  • Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.

If you require something more bespoke, please contact us.

Motorsport Use Only! This product is designed for professional motorsport applications and must be installed by a qualified technician. If assistance is required, please contact AT Power’s sales team.

Delivery / Lead Time

This Configured product is made to order:

  • Standard dispatch time is approximately 8-9 weeks from receipt of payment.

Please note that this timeframe is a guideline and is not guaranteed.

If purchased with other items:

  • Dispatched based on the item with the longest lead time in your order.

Postage and Shipping Costs:

Shipping costs are automatically calculated at the checkout after you enter your delivery address.

For sales, please see our Terms & Conditions.

Please Note

Ordering

Before placing your order, please ensure that the technical drawings match your engine’s inlet ports and that the throttle bodies will fit correctly, as engine specifications may vary or have been modified.

Anodised Finishes:

Kindly note that the colour swatches or photoshopped images are intended for guidance only. Variations in colour and finish may occur due to the inherent nature of the anodising process and its suitability. Additionally, printed materials and on-screen displays may differ in shade.

Returns and Cancellations:

Our Throttles are classified as ‘Configured’ products, as they are made to order. Please note that different terms apply to cancellations and refunds for configured items. You can find more information, clicking here. 

Installation:

  • ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
  • Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.

Incorrect installation of this product may result in engine damage.

This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert.

S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.

Related Products

Related products