Single Throttles – Drive By Wire (DBW) Electronic Throttle Bodies (ETB)
With the largest throttle bore open areas on the market, AT Power’s Shaftless Drive-By-Wire Throttle Bodies deliver up to 10% more airflow, ideal for high-performance and competition engines. Designed for direct fitment to OEM or aftermarket manifolds, they meet motorsport-grade standards.
Product Spec:
- Speed: 0.07 sec/60°.
- TPS: Variohm Euro XPK
- Interface: Standard patterns, flying leads, dual-output TPS (0.5V-4.5V).
- Patented ‘Shaftless’ Design: Maximises airflow and efficiency.
- Lightweight: Precision-machined billet aluminium (6082-T6).
- Knife-Edged Valves: Enhanced airflow velocity.
- Largest Bore Open Area: The most unrestricted airflow in its class.
- Failsafe: Built-in Limp Home Mode and dual-redundant TPS.
-
*Anodising Colours £120 exc. VAT - Silver & Black £0
*Select Hose Inlet Bore Diameter
Technical Drawings in Document Tab Below
£765.00 (exc. VAT)
AT Power Single Shaftless Butterfly Throttle Bodies Electronic Throttle Bodies
AT Power’s Drive-By-Wire (DBW) Electronic Shaftless Butterfly Throttle Bodies (ETBs) deliver a no-compromise solution for naturally aspirated and boosted competition engines demanding superior airflow. These ETBs are engineered and tested to meet the highest standards of motorsport competition.
AT Power offers a unique range of DBW single-bore throttle bodies that bolt directly onto both Original Equipment Manufacturer (OEM) and aftermarket intake manifolds, providing a complete, ready-to-use solution.
Compatible Engines:
- Ford EcoBoost 1.6L – 52mm
- Nissan R35 GT-R – 72mm
- Subaru BRZ / Toyota GT86 – 67mm
- Honda (F20) – S2000 – 67mm
- Subaru Impreza Applications – Wiggins Fitting – 67mm
Plus many more…
Key Features:
- Patented ‘Shaftless’ Design: Maximises airflow and efficiency.
- Lightweight: Precision-machined billet aluminium (6082-T6).
- Knife-Edged Valves: Enhanced airflow velocity.
- Largest Bore Open Area: The most unrestricted airflow in its class.
- Failsafe: Built-in Limp Home Mode and dual-redundant TPS.
Specifications:
- Failsafe Spring Return: Ensures safety in critical conditions.
- Operational Speed: 0.07 seconds per 60° rotation.
- Electrical Interface: Flying leads with a robust Hall Effect dual-output TPS (0.5V to 4.5V).
- Mechanical Interface: Standard patterns for seamless installation.
- Make Power personal: Colour anodised options to suit your setup.
- Factory Balanced: Calibrated to nominal idle for immediate installation.
Important:
- ECU Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
Motorsport Use Only! This product is designed for professional motorsport applications and must be installed by a qualified technician. If assistance is required, please contact AT Power’s sales team.
Delivery / Lead Time
This Configured product is made to order:
- Standard dispatch time is approximately 4-5 weeks from receipt of payment.
Please note that this timeframe is a guideline and is not guaranteed.
If purchased with other items:
- Dispatched based on the item with the longest lead time in your order.
Postage and Shipping Costs:
Shipping costs are automatically calculated at the checkout after you enter your delivery address.
For sales, please see our Terms & Conditions.
Documents
Important
Installation:
- ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
- Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.
Incorrect installation of this product may result in engine damage.
This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert.
S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.
Ordering
Before placing your order, please ensure that the technical drawings match your engine’s inlet ports and that the throttle bodies will fit correctly, as engine specifications may vary or have been modified.
Anodised Finishes:
Our anodising has a gloss finish. Kindly note that the colour swatches or photoshopped images are intended for guidance only. Variations in colour and finish may occur due to the inherent nature of the anodising process and its suitability. Additionally, printed materials and on-screen displays may differ in shade. View our anodising colour examples here.
Returns and Cancellations:
This product is classified as ‘Configured’ as it is made to order. Please note that different terms apply to cancellations and refunds for Configured products. You can find more information, clicking here.
AT Power Single Shaftless Butterfly Throttle Bodies Electronic Throttle Bodies
AT Power’s Drive-By-Wire (DBW) Electronic Shaftless Butterfly Throttle Bodies (ETBs) deliver a no-compromise solution for naturally aspirated and boosted competition engines demanding superior airflow. These ETBs are engineered and tested to meet the highest standards of motorsport competition.
AT Power offers a unique range of DBW single-bore throttle bodies that bolt directly onto both Original Equipment Manufacturer (OEM) and aftermarket intake manifolds, providing a complete, ready-to-use solution.
Compatible Engines:
- Ford EcoBoost 1.6L – 52mm
- Nissan R35 GT-R – 72mm
- Subaru BRZ / Toyota GT86 – 67mm
- Honda (F20) – S2000 – 67mm
- Subaru Impreza Applications – Wiggins Fitting – 67mm
Plus many more…
Key Features:
- Patented ‘Shaftless’ Design: Maximises airflow and efficiency.
- Lightweight: Precision-machined billet aluminium (6082-T6).
- Knife-Edged Valves: Enhanced airflow velocity.
- Largest Bore Open Area: The most unrestricted airflow in its class.
- Failsafe: Built-in Limp Home Mode and dual-redundant TPS.
Specifications:
- Failsafe Spring Return: Ensures safety in critical conditions.
- Operational Speed: 0.07 seconds per 60° rotation.
- Electrical Interface: Flying leads with a robust Hall Effect dual-output TPS (0.5V to 4.5V).
- Mechanical Interface: Standard patterns for seamless installation.
- Make Power personal: Colour anodised options to suit your setup.
- Factory Balanced: Calibrated to nominal idle for immediate installation.
Important:
- ECU Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
Motorsport Use Only! This product is designed for professional motorsport applications and must be installed by a qualified technician. If assistance is required, please contact AT Power’s sales team.
Delivery / Lead Time
This Configured product is made to order:
- Standard dispatch time is approximately 4-5 weeks from receipt of payment.
Please note that this timeframe is a guideline and is not guaranteed.
If purchased with other items:
- Dispatched based on the item with the longest lead time in your order.
Postage and Shipping Costs:
Shipping costs are automatically calculated at the checkout after you enter your delivery address.
For sales, please see our Terms & Conditions.
Documents
Important
Installation:
- ECU Compatibility and Tuning Required: Proper engine management system tuning is necessary for optimal operation and fuelling.
- Maps are supplied “as-is”. Professional dyno tuning is strongly recommended to ensure optimal performance and avoid potential engine damage.
Incorrect installation of this product may result in engine damage.
This is a motorsport-grade component and must be installed by a qualified technician. If you are unsure, we strongly advise that all mechanical and safety-critical work be carried out by a certified expert.
S-CAN 3D accepts no liability for damage resulting from improper installation or misuse. For support or guidance, please contact the AT Power sales team.
Ordering
Before placing your order, please ensure that the technical drawings match your engine’s inlet ports and that the throttle bodies will fit correctly, as engine specifications may vary or have been modified.
Anodised Finishes:
Our anodising has a gloss finish. Kindly note that the colour swatches or photoshopped images are intended for guidance only. Variations in colour and finish may occur due to the inherent nature of the anodising process and its suitability. Additionally, printed materials and on-screen displays may differ in shade. View our anodising colour examples here.
Returns and Cancellations:
This product is classified as ‘Configured’ as it is made to order. Please note that different terms apply to cancellations and refunds for Configured products. You can find more information, clicking here.
RELATED PRODUCTS
From £655.00 (exc. VAT)
